; SPRMS ;--------------------------------------------------------------- ;! Plots spectral statistics of a selected subset of a uv data set ;# Task UV PLOT SPECTRAL ;----------------------------------------------------------------------- ;; Copyright (C) 2020 ;; Associated Universities, Inc. Washington DC, USA. ;; ;; This program is free software; you can redistribute it and/or ;; modify it under the terms of the GNU General Public License as ;; published by the Free Software Foundation; either version 2 of ;; the License, or (at your option) any later version. ;; ;; This program is distributed in the hope that it will be useful, ;; but WITHOUT ANY WARRANTY; without even the implied warranty of ;; MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the ;; GNU General Public License for more details. ;; ;; You should have received a copy of the GNU General Public ;; License along with this program; if not, write to the Free ;; Software Foundation, Inc., 675 Massachusetts Ave, Cambridge, ;; MA 02139, USA. ;; ;; Correspondence concerning AIPS should be addressed as follows: ;; Internet email: aipsmail@nrao.edu. ;; Postal address: AIPS Project Office ;; National Radio Astronomy Observatory ;; 520 Edgemont Road ;; Charlottesville, VA 22903-2475 USA ;----------------------------------------------------------------------- SPRMS LLLLLLLLLLLLUUUUUUUUUUUU CCCCCCCCCCCCCCCCCCCCCCCCCCCCC SPRMS Plots spectral statistics of a subset of a uv data set INNAME Input UV file name (name) INCLASS Input UV file name (class) INSEQ 0.0 9999.0 Input UV file name (seq. #) INDISK 0.0 9.0 Input UV file disk unit # SOURCES Source name QUAL -10.0 Calibrator qualifier -1=>all CALCODE Calibrator code ' '=>all STOKES Stokes of output TIMERANG Time range to use SELBAND Bandwidth to select (kHz) SELFREQ Frequency to select (MHz) FREQID Freq. ID to select. ANTENNAS Antennas to include 0=>all BASELINE Baselines with ANTENNAS UVRANGE UV range in kilolambda. SUBARRAY 0.0 1000.0 Sub-array, 0=>all BIF Low IF number included EIF Highest IF number included BCHAN 0.0 First channel included ECHAN 0.0 last channel included DOCALIB -1.0 101.0 > 0 calibrate data & weights > 99 do NOT calibrate weights GAINUSE CL (or SN) table to apply DOPOL -1.0 10.0 If >0.5 correct polarization. PDVER PD table to apply (DOPOL>0) BLVER BL table to apply. FLAGVER Flag table version DOBAND -1.0 10.0 If >0.5 apply bandpass cal. Method used depends on value of DOBAND (see HELP file). BPVER Bandpass table version SMOOTH Smoothing function. See HELP SMOOTH for details. OPTYPE Desired parameter: AMP, PHAS, REAL, IMAG, AUTO, SAMP DOWEIGHT > 0 use weights when averaging over baselines SOLINT Averaging time (min) PIXRANGE Range of values in plot of mean APARM (1,2) range of values in plot of standard deviation FACTOR Scale points by abs(FACTOR) < 0 -> also connect lines DOTV > 0 -> plot on TV, else make a plot file GRCHAN Graphics channel to use LTYPE -410.0 410.0 Type of labeling: 1 border, 2 no ticks, 3 - 6 standard, 7 - 10 only tick labels <0 -> no date/time BADDISK Disks to avoid for scratch ---------------------------------------------------------------- SPRMS Task: This task applies calibration to a selected subset of a uv data file and then averages all included data as a function of spectral channel over the stated averaging time. The results are then averaged to determine mean and standard deviation. Two plots are then generated. Adverbs: INNAME.....Input UV file name (name). Standard defaults. INCLASS....Input UV file name (class). Standard defaults. INSEQ......Input UV file name (seq. #). 0 => highest. INDISK.....Disk drive # of input UV file. 0 => any. SOURCES....Source to be included. ' '=> all; if any starts with a '-' then all except ANY source named. QUAL.......Qualifier of source to be included. -1 => all. CALCODE....Calibrator code of sources to include. ' '=> all. STOKES.....Specifies which STOKES parameter is included. 'I','Q','U','V', 'RR','LL', 'RL', 'LR', 'XX','YY', 'XY', 'YX' Note: only 1 Stokes allowed. TIMERANG...Time range of the data to be included. In order: Start day, hour, min. sec, end day, hour, min. sec. Days relative to ref. date. SELBAND....Bandwidth of data to be selected. If more than one IF is present SELBAND is the width of the first IF required. Units = kHz. For data which contain multiple bandwidths/frequencies the task will insist that some form of selection be made by frequency or bandwidth. SELFREQ....Frequency of data to be selected. If more than one IF is present SELFREQ is the frequency of the first IF required. Units = MHz. FREQID.....Frequency identifier to select (you may determine which is applicable from the OPTYPE='SCAN' listing produced by LISTR). If either SELBAND or SELFREQ are set, their values override that of FREQID. However, setting SELBAND and SELFREQ may result in an ambiguity. In that case, the task will request that you use FREQID. ANTENNAS...A list of the antennas to be included. All 0 => all. If any number is negative then all antennas listed are NOT included and all others are. BASELINE...Baselines between antennas named in ANTENNAS and those named in BASELINE are selected.. There are four possible combinations of ANTENNAS and BASELINE: 1. ANTENNAS = 0; BASELINE = 0. All possible baselines are selected. 2. ANTENNAS <>0; BASELINE = 0. a)All ANTENNAS > 0 Baselines including an antenna in the ANTENNAS list are selected; b)Some ANTENNAS < 0 All baselines NOT including an antenna in the ANTENNAS list are selected; 3. ANTENNAS = 0; BASELINE <> 0. a)All BASELINE > 0 Baselines including an antenna in the BASELINE list are selected; b)Some BASELINE < 0 All baselines NOT including an antenna in the BASELINE list are selected; 4. ANTENNAS <> 0; BASELINE <> 0. a)All ANTENNAS>0 and all BASELINE>0 Baselines between antennas named in ANTENNAS and those named in BASELINE are selected. b)Some ANTENNAS<0 .OR. some BASELINE<0 Baselines between antennas named in ANTENNAS and those named in BASELINE are DE-selected, all others are selected. UVRANGE....Range of projected spacings to be plotted in 1000's of wavelengths. 0 => 1, 1.E10 SUBARRAY...Sub-array number to include. 0=>all. BIF........First IF to include. 0 -> 1. EIF........Last IF to include. 0 -> max. BCHAN......First channel to include. 0=>all. ECHAN......Highest channel to include. 0=>all higher than BCHAN DOCALIB....If true (>0), calibrate the data using information in the specified Cal (CL) table for multi-source or SN table for single-source data. Also calibrate the weights unless DOCALIB > 99 (use this for old non-physical weights). GAINUSE....version number of the CL table to apply to multi-source files or the SN table for single source files. 0 => highest. DOPOL......If > 0 then correct data for instrumental polarization as represented in the AN or PD table. This correction is only useful if PCAL has been run or feed polarization parameters have been otherwise obtained. See HELP DOPOL for available correction modes: 1 is normal, 2 and 3 are for VLBI. 1-3 use a PD table if available; 6, 7, 8 are the same but use the AN (continuum solution) even if a PD table is present. PDVER......PD table to apply if PCAL was run with SPECTRAL true and 0 < DOPOL < 6. <= 0 => highest. BLVER......Version number of the baseline based calibration (BL) table to apply. <0 => apply no BL table, 0 => highest. FLAGVER....specifies the version of the flagging table to be applied. 0 => highest numbered table. <0 => no flagging to be applied. DOBAND.....If true (>0) then correct the data for the shape of the antenna bandpasses using the BP table specified by BPVER. The correction has five modes: (a) if DOBAND=1 all entries for an antenna in the table are averaged together before correcting the data. (b) if DOBAND=2 the entry nearest in time (including solution weights) is used to correct the data. (c) if DOBAND=3 the table entries are interpolated in time (using solution weights) and the data are then corrected. (d) if DOBAND=4 the entry nearest in time (ignoring solution weights) is used to correct the data. (e) if DOBAND=5 the table entries are interpolated in time (ignoring solution weights) and the data are then corrected. IMAGR uses DOBAND as the nearest integer; 0.1 is therefore "false". BPVER......Specifies the version of the BP table to be applied 0 => highest numbered table. <0 => no bandpass correction to be applied. SMOOTH.....Specifies the type of spectral smoothing to be applied to a uv database . The default is not to apply any smoothing. The elements of SMOOTH are as follows: SMOOTH(1) = type of smoothing to apply: 0 => no smoothing To smooth before applying bandpass calibration 1 => Hanning, 2 => Gaussian, 3 => Boxcar, 4 => Sinc To smooth after applying bandpass calibration 5 => Hanning, 6 => Gaussian, 7 => Boxcar, 8 => Sinc SMOOTH(2) = the "diameter" of the function, i.e. width between first nulls of Hanning triangle and sinc function, FWHM of Gaussian, width of Boxcar. Defaults (if < 0.1) are 4, 2, 2 and 3 channels for SMOOTH(1) = 1 - 4 and 5 - 8, resp. SMOOTH(3) = the diameter over which the convolving function has value - in channels. Defaults: 1,3,1,4 times SMOOTH(2) used when input SMOOTH(3) < net SMOOTH(2). OPTYPE.....Type of data examined: 'AMP', 'PHAS', 'REAL', 'IMAG', 'SAMP' (scalar amplitude between baselines, times) 'AUTO' (autocorrelations only) else 'AMP' 'SAMP' selects scalar averaging between SOLINT intervals (with vector averaging being used within SOLINT when DOWEIGHT <= 0) or scalar averaging over all samples when DOWEIGHT > 0. 'AMP selects vector averaging over all baselines and times in the included data set. DOWEIGHT...If DOWEIGHT > 0, data weights are used when averaging multiple baselines and times. Note that in this case, SOLINT is ignored. If DOWEIGHT <= 0, the task uses data weights to average over the time interval, but weights each time interval equally. SOLINT.....Averaging time in minutes: 0 -> 0.007 PIXRANGE...Range of values in plot of mean. 0 -> min to max APARM......If APARM(2) > APARM(1), use this range when pltting the standard deviation. FACTOR.....Scale the pointed plots by abs(FACTOR). 0 -> 1.0 If < 0, also connect the plotted points with lines. DOTV.......> 0 => plot directly on the TV device, otherwise make a plot file for later display on one or more devices (including the TV if desired). GRCHAN.....Graphics channel to use. 0 -> multiple LTYPE......Labelling type, see HELP LTYPE for details: 1 = border, 2 = no ticks, 3 or 7 = standard, 4 or 8 = relative to ref. pixel, 5 or 9 = relative to subimage (BLC, TRC) center, 6 or 10 = pixels. 7-10 all labels other than tick numbers and axis type are omitted. Less than 0 is the same except that the plot file version number and create time are omitted. Add n * 100 to alter the metric scaling. BADDISK....The disk numbers to avoid for scratch files (sorting tables mostly). ----------------------------------------------------------------