AIPS NRAO AIPS HELP file for HOCLN in 31DEC24



As of Fri Feb 23 14:22:08 2024


HOCLN: Task to do a clean of holography data

INPUTS

INNAME                             Amplitude image name (name)
INCLASS                            Amplitude image name (class)
INSEQ           0.0      9999.0    Amplitude image name (seq #)
INDISK          0.0         9.0    Amplitude image disk drive #
IN2NAME                            Phase image name (name)
IN2CLASS                           Phase image name (class)
IN2SEQ          0.0      9999.0    Phase image name (seq #)
IN2DISK         0.0         9.0    Phase image disk drive #
IN3NAME                            Beam amp image name (name)
IN3CLASS                           Beam amp image name (class)
IN3SEQ          0.0      9999.0    Beam amp image name (seq #)
IN3DISK         0.0         9.0    Beam amp image disk drive #
IN4NAME                            Beam phase image name (name)
IN4CLASS                           Beam phase image name (class)
IN4SEQ          0.0      9999.0    Beam phase image name (seq #)
IN4DISK         0.0         9.0    Beam phase image disk drive #
OUTNAME                            Output image name (name)
OUTSEQ          0.0      9999.0    Output image name (seq #)
OUTDISK         0.0         9.0    Output image disk drive #
NITER           1.0                Number iterations
GAIN                               Loop gain
BMAJ                               FWHM of restoring beam pixels
DOTV                               > 0 -> display on TV

HELP SECTION

HOCLN
Type: Task
Use:
Adverbs:
  INNAME......Amplitude image name (name).  blank=>any  V_AMP
  INCLASS.....Amplitude image name (class).  blank=>any
  INSEQ.......Amplitude image name (seq #).  0=>any
  INDISK......Disk drive # for the first image.  0=>any
  IN2NAME.....Phase image name (name).                  V_PHA
  IN2CLASS....Phase image name (class).  blank=>any
  IN2SEQ......Phase image name (seq #).  0=>any
  IN2DISK.....Disk drive # for the second image.  0=>any
              Ignored if IN2NAME = ' '.
  IN3NAME.....Beam amplitude name (name).  blank=>any   P_AMP
  IN3CLASS....Beam amplitude name (class).  blank=>any
  IN3SEQ......Beam amplitude name (seq #).  0=>any
  IN3DISK.....Disk drive # for the beam amp.  0=>any
  IN4NAME.....Beam phase name (name).  blank=>any       P_PHA
  IN4CLASS....Beam phase name (class).  blank=>any
  IN4SEQ......Beam phase name (seq #).  0=>any
  IN4DISK.....Disk drive # for the second weight.  0=>any
  OUTNAME.....Output image name (name)
  OUTCLASS....Set by task as C_AMP, C_PHA
  OUTSEQ......Output image name (seq #)
  OUTDISK.....Output image disk drive #
  NITER.......Number of Clean cycles
  GAIN........Loop gain.  0 -> 0.03
  BMAJ........FWHM in pixels of circular restoring beam
  DOTV........> 0 display on TV

EXPLAIN SECTION


AIPS