AIPS HELP file for SYPRT in 31DEC21
As of Tue Oct 26 22:12:05 2021
SYPRT: Task to print SY table values
INNAME Image name(name).
INCLASS Image name(class).
INSEQ 0.0 9999.0 Image name(seq. #). 0=>high
INDISK Disk drive #. 0=>any
INVERS 0.0 46655.0 SY table version number
SOURCES Source names to include
QUAL -10.0 Qualifier -1=>all
CALCODE Restrict to this calcode
SELBAND Bandwidth to select (kHz)
SELFREQ Frequency to select (MHz)
FREQID Freq. ID to select.
SUBARRAY 0.0 1000.0 Subarray, 0 => 1
TIMERANG Time range to use
ANTENNAS Desired or unwanted antennas
FLAGVER -1.0 > 0 => apply flags to SY
DOCRT -3.0 132.0 > 0 -> use the terminal,
else use the line printer
> 72 => terminal width
OUTPRINT Printer disk file to save
BIF First IF to print
EIF Last IF to print
OPTYPE 'DIFS','SUMS','TSYS' list
NDIG Number of digits to use 0->4
FACTOR Scale print by FACTOR 0 -> 1
DOSCALE > 0 scale antennas separately
BADDISK Disks to avoid for scratch
Use: SYPRT reads EVLA SY and CD tables and prints the selected data
as a table with columns being separate IFs. PRTSY is another
task that prints scan and statistical summaries of SY data.
INNAME.....Image name (name). Standard defaults.
INCLASS....Image name (class). Standard defaults.
INSEQ......Image name (seq. #). 0 => highest.
INDISK.....Disk unit #. 0 => any.
INVERS.....Version number of SY table to be examined.
SOURCES....List of sources to be printed. ' '=> all; if any
starts with a '-' then all except ANY source named.
QUAL.......Qualifier of source to be printed. -1 => all.
CALCODE....Calibrator code of sources to print. ' '=> all.
'* ' => any non blank code (cal. only)
'-CAL' => blank codes only (no calibrators)
anything else = calibrator code to select.
SELBAND....Bandwidth of data to be selected. If more than one IF is
present SELBAND is the width of the first IF required.
Units = kHz. For data which contain multiple
bandwidths/frequencies the task will insist that some form
of selection be made by frequency or bandwidth.
SELFREQ....Frequency of data to be selected. If more than one IF is
present SELFREQ is the frequency of the first IF required.
Units = MHz.
FREQID.....Frequency identifier to select (you may determine which is
applicable from the OPTYPE='SCAN' listing produced by
LISTR). If either SELBAND or SELFREQ are set, their values
overide that of FREQID. However, setting SELBAND and
SELFREQ may result in an ambiguity. In that case, the task
will request that you use FREQID. If all SELBAND, SELFREQ
and FREQID are not specified (.le. 0) then all FQ ids will
SUBARRAY...Subarray number to print. 0 => 1.
TIMERANG...Time range of the data to be plotted. In order:
Start day, hour, min. sec, end day, hour, min. sec.
Days relative to reference date.
ANTENNAS...A list of the antennas to be printed. If any number is
negative then all antennas listed are NOT to be printed
and all others are.
FLAGVER....> 0 => apply flag table version FLAGVER to SY table
DOCRT......False (<= 0) use the line printer if OUTPRINT = ' '
else write named OUTPRINT file only.
When OUTPRINT is not blank, DOCRT=-2 suppresses the
page-feed character on page headers and DOCRT=-3
suppresses page headers and most other header
information. When OUTPRINT is blank, the line
printer will be used. PRTSY now counts the lines
to be printed before printing any and asks for
permission to continue if the count > 500.
True (> 0) use the terminal interactively. The task
will use the actual terminal width as a display limit
unless 72 < DOCRT < width. In that case, the display
limit will be DOCRT characters.
OUTPRINT...Disk file name in which to save the line printer output.
' ' => use scratch and print immediately for interactive
jobs - batch jobs use OUTPRINT = 'PRTFIL:BATCHjjj.nnn'
(jjj= job #, nnn = user #). When OUTPRINT is not blank,
multiple outputs are concatenated, and the file is not
OPTYPE.....'DIFS' print only Pdif information
'SUMS' print only Psum information
'TSYS' print only Tcal*Psum/Pdif information
'PDIF' print only Pdif information
'PSUM' print only Psum information
'PSYS' print only Tcal*Psum/Pdif information
NDIG.......Number of digits to use (2-7) 0 -> 4 (max ' 9999'
FACTOR.....The display prints normalized values but the
normalization may be seriously affected by a few high
values. You may scale those displays by a factor
(0 -> 1, values > 1 are useful). If you do this, the
very high values will show as "*****". Blanked values
show as " ----". TSYS gets blanked if Tcal, Psum, or
Pdif are blanked or have values out of range.
DOSCALE....> 0 => scale each antenna by its range of values
<= 0 => scale all antennas the same by the overall
range of values
BADDISK....The disk numbers to avoid for scratch files (sorting